PG 100# Bourdon Sensing Pressure Gauges |
| |
 |
Features
• "All Stainless Steel" socket welded to case construction - Weather-proof casing to IP:66, 15:13947
• Shatter-proof glass as a standard
• Micro-gear pointer for zero re-set.
• Blowout disc at the rear of the case.
• Dry and Liquid Filled versions
Performance
• Pressure measurement upto 1000 bar.
• Accuracy : ± 1% of full span and over pressure protection 1.3 x full span. - • Type Approval for "Endurance" and "Shock" tests obtained
Pressure Gauges manufactured by us are designed for use in process industries which demand consistent performance and longevity.
All Stainless Steel and welded construction can resist the most severe operating conditions created by environment as well as process media. Micro-gear pointer & blowout disc provided as a standard feature for dry gauges.
Pressure Gauges are filled with dampening fluids to prevent damage due to vibration, when the gauge is mounted on equipment with severe vibrations and high pulsations.
Pressure gauges can be supplied with coil/pig tail syphons for use on steam service and pulsation dampers (snubbers) for use on pulsating services. Wherever the max. operating pressure exceeds the overpressure limit of the gauge, these are supplied along with gauge savers. |
| |
|
| |
Ordering Example
PG100# Series P-B-B-1-4-S4-S6-S4-S4-0/16-3N-Option 0 |
|
|
|
|
|
| PG101 Series Capsule Sensing Pressure Gauges |
| |
 |
Features
• "All Stainless Steel" socket welded to case
construction
• Weather-proof casing to IP:66, 15:13947
• Shatter-proof glass as a standard
• Zero re-set screw provided on dial
• Blowout disc at the rear of the case
Performance
• Accuracy :± 1.6% of full span and over
pressure protection 1.3 x full span.
• Measurement span from 10 mbar to 1000 mbar. |
| |
Capsule Gauges are designed for measurement of low pressure in air or other dry gaseous media. These gauges are also suitable for use on corrosive process. Capsule element consists of 2 circular diaphragms laser welded along their circumference.
Capsule systems comprise of a capsule element in DIN 1.4571 (55316 Ti) and a built-on movement assembly in St. steel and suitable for use on corrosi\7e processes. Alternatively, a combination of Phosphor bronze capsule with brass movement assembly can be used for pressure measurements in noncorrosive media. |
| |
|
| |
Ordering Example
PG101# Series P-C-B-1-4-S4-S6Ti-S4-S4-0/520-3N-Option 0 |
|
|
|
|
|
| PG110 Series Pressure Gauges with chemical seal unit and threaded process connection |
| |
 |
Feature
• All Stainless Steel construction.
• Welded diaphragm design
• Weather-proof casing to IP:66, 15:13947
• Integral and remote seal designs
• Seal fluid options to suit process fluids.
• Dry and Filled versions
Performance
• Accuracy : ± 1% of full span and over pressure protection 1.3 x full span.
|
| |
Diaphragm Seals are provided to isolate the sensing element of pressure gauge from process fluids which are corrosive, viscous, sedimentous or high
temperature fluids.
The diaphragm is welded to the top chamber and leak proof tested to ensure separation of filling fluid from the process fluid. A flushing ring can also be provided for cleaning or purging the seal without its removal from the process.
Wetted part materials can be selected to suit practically all applications. |
| |
|
| |
Ordering Example
PG110# Series P-B-B-1-4-S4-S6-S6-S4-0/25-SU11-2M-S6-S4-3N-Option 0 |
|
|
|
|
|
| PG120 Series Pressure Gauges with chemical seal unit and flanged process connection |
| |
 |
Features
• All Stainless Steel construction
• Welded diaphragm design
• Weather-proof casing to 1P:66, 15:13947
• Integral and remote seal designs
• Dry and Filled versions
• Seal fluid options to suit process fluids · • Process flange DN 25 and below
Performance
• Accuracy ± 1 % of full span and over pressure protection 1.3 x full span. |
| |
Diaphragm Seals are provided to isolate the sensing element of pressure gauge from process fluids which are corrosive, viscous, sedimentous or high
temperature fluids.
The diaphragm is welded to the top chamber and leak proof tested to ensure separation of filling fluid from the process fluid. A flushing ring can also bt.provided for cleaning or purging the seal without its removal from the process'. Wetted part materials can be selected to suit practically all applications. |
| |
|
| |
Ordering Example
PG120# Series P-B-B-1-4-S4-S6-S6-S4-0/10-SU12-2M-S6-S4-S6-1"150-Option 0 |
|
|
|
|
|
| PG130 Series Pressure Gauges with chemical seal unit and flanged process connection |
| |
 |
Features
• All Stainless Steel construction
• Welded diaphragm design
• Weather-proof casing to IP:66, 15:13947
• Integral and remote Seal designs
• Dry and Filled versions
• Seal fluid options to suit process fluids
• processflange DN 40 and above
Performance
• Accuracy ± 1% of full span and over pressure protection 1.3 x full span. |
| |
Diaphragm Seals are provided to isolate the sensing element of pressure gauge from process fluids which are corrosive, viscous, sedimentous or high temperature fluids.
The diaphragm is welded to the top chamber and leak proof tested to ensure separation of filling fluid from the process fluid. A flushing ring can also be provided for cleaning or purging the seal without its removal from the process.
Wetted part materials can be selected to suit practically all applications. |
| |
|
| |
Ordering Example
PG130# Series P-B-B-1-4-S4-S6-S6-S4-0/25-SU12-XX-S6-S4-S6-2"300-Option 0 |
|
|
|
|
|
| PG140 Series Diaphragm Sensing Pressure Gauges with Threaded process connection |
| |
 |
Features
• All Stainless Steel construction
• Weather-proof casing to IP:66,
15:13947
• Dry and Filled versions
• Shatter-proof glass as a standard
• Micro-gear pointer for zero re-set.
• Blowout disc at the rear of the case
Performance
• Accuracy ± 1% of full span and over
pressure protection 2 x full span.
• Measuring range 2Smbar to 40bar |
| |
Pressure Gauges employ an elastic diaphragm as a sensing element and generally used for process having increased overpressure safety
requirements.
Diaphragm Gauges are used for measuring pressures of viscous, sedimentous or corrosive fluids and are preferred to seal units because of their capacity to withstand over pressures.
Diaphragm material in DIN 1.4571 (55316 Ti) is offered as a standard. Protective foils in PTFE, Hastelloy B / C, Tantalum can be offered for resisting corrosive process media. |
| |
|
| |
Ordering Example
PG140# Series P-D-B-1-6-S4-S6Ti-S6-S4-0/4000mmWc-S4-S6-3N-Option 0 |
|
|
|
|
|
PG150 Series Diaphragm Sensing Pressure Gauges with Flanged process connection |
| |
 |
Features
• All Stainless Steel construction
• Weather-proof casing to IP:66, IS:13947 • Dry and Filled versions
• Shatter-proof glass as a standard
• Micro-gear pointer for zero re-set.
• Blowout disc at the rear of the case.
Performance
• Accuracy ± 1% of full span and over
pressure protection 2 x full span
• Measuring range 2Smbar to 40obar |
| |
These Pressure Gauges employ an elastic diaphragm as a sensing element and g~II' allv used for process having increased overpressure safety
requirements.
Diaphragm Gauges are used for measuring pressures of viscous, sedimentous or corrosive fluids and are preferred to seal units because of their capacity
to withstand over pressures.
Diaphragm material in DIN 1.4571 (55316 Ti) is offered as a standard. Protective foil in PTEF, Hastelloy B / C, Tantalum can be offered for resisting corrosive process media. |
| |
|
| |
Ordering Example
PG150# Series P-D-B-1-6-S6-S6Ti-S6-S4-0/600-S6-S6-1"150#RF 0 |
|
|
|
|
|
| Tables |
| |
|
| |
|
